Privacy Policy | Terms & Conditions

© 2018 Kaz USA, Inc. A Helen of Troy Company 400 Donald Lynch Blvd. Marlborough, MA 01752. Honeywell is a trademark of Honeywell International Inc., used under license by Helen of Troy Limited.

HPA250 Quickstart Guide

Installing or Replacing the Filters

Make sure power is turned OFF

Push front grille in at the top to release hidden latches. Pull grille away from the air purifier

Remove old filters, if applicable, and discard

Unwrap new HEPA filters and insert into the air purifier housing, ensuring that the pull tabs are facing outward

Unwrap new Pre-filter and place on top of the HEPA filters, tucking the edges into the tabs

Replace the front grille by placing the tabs on the bottom of the grille into the slots on the air purifier. Gently push the top of the grille to latch in place

To reset the Filter Check lights on the control panel, press and hold the button for approximately 3 seconds until the light turns off

Note: If changing your filters before the lights are illuminated, with the unit powered off, press and hold the appropriate button for 5 seconds. The light will flash red twice to signal that the indicator has been reset.

Operating the Air Purifier

From the app home page or the air purifier control panel, select the desired cleaning level by TAPPING the desired button.

Manual Cleaning Settings:

Tap POWER for on/off and then select your desired cleaning level

ALLERGEN optimizes allergen capturing performance during allergen season

GENERAL CLEAN for general, everyday air cleaning

GERM optimizes germ capturing performance. Use during cold and flu season

Tap TURBO for power cleaning or fast odor reduction

To use the VOC Function from the app home page or the air purifier control panel.

Automatic Cleaning Based on VOC Levels in the Air:

Tap the VOC sensor for automatic operation based on VOC (Volatile Organic Compounds) sensed in the air. The button will indicate the air quality from Green (good) to Red (high VOCs present) and operate the air purifier automatically to help reduce the VOC levels in the room

Using the Timer Option from the app home page or the air purifier control panel to set how long the air purifier will run before it automatically shuts off.

Auto Fan Shut Off:

Tap the desired arrow to toggle through to the desired time setting

The LED Display will automatically count down and display the number of hours left on the timer

loading … please wait