You are now being redirected to everydropwater.com. EveryDrop™ by Whirlpool® features superior PUR water filtration technology. Proceed to Everydropwater.com to complete your purchase
Honeywell Comfort Control™ Tower Fan & Electronic Tower Fan (HY013/HY023)
Question: How Do I Register My Product For Warranty?
Answer: Please go to warranty-registration to register your product to receive product information updates as well as the chance to receive special promotional offers.
Question: How Do I Assemble My Fan?
A Phillips head screwdriver is required for assembly and is not included with the fan purchase.
Place the power cord through the center of the front and rear pedestal assemblies with the screw hole openings facing towards the fan.
Align the front and rear pedestal assembly and firmly snap together
Securing the Tower Fan to the Pedestal:
Gently turn fan upside down.
Line up the 3 screw holes on the pedestal with the 3 screw holes on the bottom of the fan housing. Use the 3 (M5 x 12) screws included in the box and a Phillips head screwdriver to secure the pedestal to the fan housing
With the fan in the upside-down position, pass the power cord through the recessed slot located in the center of the rear base assembly
Align the rear and front base assembly and firmly snap together by pushing the 4 round extrusion into the adjacent circles of the connecting pieces
Securing the Tower Fan to the Base:
Align the 3 screw holes in the bottom of the pedestal with the 3 screw holes located on the base. Using the 3 (M5 x 12) screws and Phillips head screwdriver, secure the base into the bottom portion of the fan housing
Place the power cord through the cut out on the bottom of the base. Gently pull any slack out of the power cord and place the cord securely in the power cord holding bracket
Place the fan right side up. Your fan is now ready for use.
Air Purifier Filters